Brema Ice Cube Maker CB Series 425W HC - Ice Cone (48kg)
€1,781.33*
€2,678.69 (33.5% saved)Product information "Brema Ice Cube Maker CB Series 425W HC - Ice Cone (48kg)"
Ice production/day1: 48 kg
Container capacity: 25 kg (nominal capacity)
Condenser type: Water cooling
Cooling water consumption (per kg of ice): 12 liters
Refrigerant: R290
Cleaning program: yes
Connection (W)2: 450
Fuse: 10 A
Dimensions (W×D×H): 497 × 592 × 797 mm
Height of feet: 110–150 mm
Weight: 46 kg
Finish: AISI 304 stainless steel, brushed
Can be installed under a counter: yes (min. 5 cm clearance on all sides according to manufacturer's specifications)
The Brema CB 425W HC ice cube maker is designed to deliver up to 48 kg of ice cubes in 24 hours – uniform, dimensionally stable (approx. 18 g) and crystal clear. The water cooling system keeps performance stable even at higher room temperatures, operates quietly and does not emit warm air into the guest area. (Requirement: suitable supply/drain; additional water requirements must be taken into account.)
Spray system: crystal-clear cubes with substanceWiththe Brema spray system, water is sprayed into ice molds in a fine mist and frozen layer by layer. This produces clear ice cubes without air pockets, with a dense structure and slower melting rate. This keeps cocktails and long drinks cool for a long time without watering them down.
Cooling concept with R290R290 (propane) is used as the refrigerant – natural, efficient, and with a low greenhouse effect. In combination with water cooling, the daily output remains reliable even at higher ambient temperatures.
Designed for easy maintenanceThe AISI 304 stainless steel housing, rounded interior surfaces, and removable components make maintenance and cleaning routines much easier. The integrated cleaning program supports regular, thorough manual cleaning—it does not replace it, but helps to ensure hygiene standards and ice quality are maintained in the long term.
Connection & water qualityTo achieve the specified values and ensure proper operation, professional installation is required. A water filter is useful and recommended by us: it ensures clean-tasting ice cubes and protects the system from limescale and particles.
Your advantages at a glance- 48 kg/24 h – reliable output even during peak times
- Water cooling: quiet, no warm air emission, stable in warm conditions
- Spray system: clear, dense ice cubes (approx. 18 g)
- R290 (propane): efficient, environmentally friendly, future-proof
- AISI 304 stainless steel: hygienic and robust
- Integrated cleaning program to supplement manual cleaning
Spare and wear parts as well as accessories can be found in the spare parts finder at Barstuff.com. Our team will be happy to assist you with any questions you may have about Brema ice makers – from planning to commissioning.
The CB 425W HC scores highly wherever quiet operation and consistent ice production are required in confined or air-conditioned counter areas.
| Construction: | Can be built under, Free-standing |
|---|---|
| Ice type: | Cubes |
| Production method: | Negative spray |
| Cooling: | Water-cooled |
| Special equipment: | Automatic cleaning system |
1Ambient temperature: +21 °C, water temperature: +15 °C
2Ambient temperature: +43 °C
Brema
Brema Group S.p.A.
Via dell'Industria 10, 20035 Villa Cortese (MI)
Italy
brema [at] legalmail.it