listing.sales
Mixer tap hot/cold 2 sink - High pressure
Item no.:
4562
| Quantity | Unit price | Saved |
|---|---|---|
| To 2 |
€151.29
|
0 % |
| To 5 |
€146.75
|
3 % |
| To 11 |
€143.72
|
5 % |
| From 12 |
€136.16
|
10 % |
Prices incl. VAT plus
,
free shipping (DE) from €99**
In stock
|
Only 1 remaining
Delivery time: 2-5 Working days
Product information "Mixer tap hot/cold 2 sink - High pressure"
Hose length (cm): 38,0
Height (cm): 17,5
Length Underflow pipe (cm): 28,5
Thread size water hose: 3/8"
Material: chrome-plated brass, stainless steel
Height (cm): 17,5
Length Underflow pipe (cm): 28,5
Thread size water hose: 3/8"
Material: chrome-plated brass, stainless steel
Use this high pressure mixer tap if you have separate hot and cold connections or an instantaneous water heater in your bar, kitchen or bathroom. The flexible hoses are made of stainless steel and colour coded. The red hose should be attached to the hot water connection and the blue one to the cold water connection. Both hoses have a length of approx. 38,0cm and a thread size of 3/8". You can easily extend the hoses, if you wish.
The mixer tap is made of chrome-plated brass and provided with four different taps. Use the two rear taps are intended for the outlet pipe. The two front taps will regulate the underflow pipes. The underflow pipes have a length of approx. 28,5cm and a distance of approx. 12,5cm to each other. All taps are equipped with a ball valve. This means, you only have to turn the tap in an 180° ankle to open or close the water inflow. The height of the mixer tap is about 18,5cm - measured from the sink to the top of the outlet pipe.
Ensure you will have a sufficiently large opening of at least 3,5cm in your sink for installation. The tap will be delivered with mounting material including screw thread with nut and sealing rings already attached to the underflow pipes.
The mixer tap is made of chrome-plated brass and provided with four different taps. Use the two rear taps are intended for the outlet pipe. The two front taps will regulate the underflow pipes. The underflow pipes have a length of approx. 28,5cm and a distance of approx. 12,5cm to each other. All taps are equipped with a ball valve. This means, you only have to turn the tap in an 180° ankle to open or close the water inflow. The height of the mixer tap is about 18,5cm - measured from the sink to the top of the outlet pipe.
Ensure you will have a sufficiently large opening of at least 3,5cm in your sink for installation. The tap will be delivered with mounting material including screw thread with nut and sealing rings already attached to the underflow pipes.
Prime Bar
Prime Bar
Wohlrabedamm 12
13629 Berlin
Germany
info [at] barstuff.de
There aren't any asked questions yet.
-
-
-
-
listing.sales
Mixer tap hot/cold 1 sink - High pressure
From €101.33incl. VAT, equals €85.15 plus VAT*
-
-
-
listing.sales
Bottle funnel with strainer - stainless steel
From €10.52incl. VAT, equals €8.84 plus VAT*
-
-
-
-
-
-
-
-
-
listing.sales
Double jigger 20/40ml, scaling - stainless steel
From €5.39incl. VAT, equals €4.53 plus VAT*
-
-
