listing.sales
Mixer tap hot/cold 1 sink - High pressure
Item no.:
3145
| Quantity | Unit price | Saved |
|---|---|---|
| To 2 |
€112.59
|
0 % |
| To 5 |
€109.21
|
3 % |
| To 11 |
€106.96
|
5 % |
| From 12 |
€101.33
|
10 % |
Prices incl. VAT plus
,
free shipping (DE) from €99**
Not in stock
Delivery time: 4-9 Working days
Product information "Mixer tap hot/cold 1 sink - High pressure"
Hose length (cm): 38,0
Height (cm): 17,5
Length Underflow pipe (cm): 28,5
Thread size water hose: 3/8"
Material: chrome-plated brass, stainless steel
Height (cm): 17,5
Length Underflow pipe (cm): 28,5
Thread size water hose: 3/8"
Material: chrome-plated brass, stainless steel
This high pressure mixer tap should be used, if you have separate hot and cold water connections or an instantaneous water heater in your kitchen, at your bar or in your restrooms.
The mixer tap is equipped with two flexible hoses made of stainless steel. The red one should be attached to the hot water connection, the blue one to the cold water connection. The hoses have a thread size of 3/8" and a length of approx. 38,0cm. Due to the common thread size you can easily extend the hoses, if necessary. The mixer tap is provided with three taps. The hot water tap and one cold water tap are intended for the outlet pipe. The second cold water tap regulates the underflow pipe. This pipe has a length of approx. 28,5cm. Please ensure that you will have an sufficiently deep sink.
The taps of this fitting are all equipped with a ball valve. This way you just have to turn the tap in an 180° ankle to open or close the water inflow. The mixer tap has a height of approx. 17,5cm (measured from the sink to top edge of outlet pipe). The fitting is - except the water hoses - made of chrome-plated brass.
During the installation, ensure you´ll have sufficiently large opening in your sink. For this mixer tap you´ll need an opening of 3,0cm minimum. This tap will be delivered with installation material, including two sealing rings, one washer, one screw thread with nut as well as the underflow pipe with a matching sealing ring.
The mixer tap is equipped with two flexible hoses made of stainless steel. The red one should be attached to the hot water connection, the blue one to the cold water connection. The hoses have a thread size of 3/8" and a length of approx. 38,0cm. Due to the common thread size you can easily extend the hoses, if necessary. The mixer tap is provided with three taps. The hot water tap and one cold water tap are intended for the outlet pipe. The second cold water tap regulates the underflow pipe. This pipe has a length of approx. 28,5cm. Please ensure that you will have an sufficiently deep sink.
The taps of this fitting are all equipped with a ball valve. This way you just have to turn the tap in an 180° ankle to open or close the water inflow. The mixer tap has a height of approx. 17,5cm (measured from the sink to top edge of outlet pipe). The fitting is - except the water hoses - made of chrome-plated brass.
During the installation, ensure you´ll have sufficiently large opening in your sink. For this mixer tap you´ll need an opening of 3,0cm minimum. This tap will be delivered with installation material, including two sealing rings, one washer, one screw thread with nut as well as the underflow pipe with a matching sealing ring.
Prime Bar
Prime Bar
Wohlrabedamm 12
13629 Berlin
Germany
info [at] barstuff.de
There aren't any asked questions yet.
-
-
-
-
-
-
-
listing.sales
Mixer tap hot/cold 2 sink - low pressure
From €130.67incl. VAT, equals €109.81 plus VAT*
-
-
-
-
-
-
-
-
listing.sales
Bottle funnel with strainer - stainless steel
From €10.52incl. VAT, equals €8.84 plus VAT*
