Sign holder DIN A4 for queue-management post - stainless steel
Item no.:
8176
€53.09*
Content:
1 Piece
Prices incl. VAT plus
,
free shipping (DE) from €99**
In stock
|
Only 1 remaining
Delivery time: 2-5 Working days
Product information "Sign holder DIN A4 for queue-management post - stainless steel"
Frame outside (cm): 30,5x21,5
Frame inside (cm): 27,7x19,0
Material: stainless steel
suitable for queue-management post #2297
Frame inside (cm): 27,7x19,0
Material: stainless steel
suitable for queue-management post #2297
Expand your people guidance system with this A4 size sign holder. You can use the stainless steel sign holder for any information, such as remaining waiting time, safety instructions, safety rules or even advertising. The frame for information signs can be used from both sides.
The sign holder belongs on the queue-management post with cylinder (order-no. 2297) and is screwed on. The bracket is made of stainless steel with two plexiglass panes. Print out your sign on an A4 sheet and place it between the two panes. Push these into the sign holder from above. A prior lamination is not necessary because the sheet is protected from dirt and splash water by the plexiglass. However, lamination is recommended outdoors because the top of the sign holder is not closed and rainwater could penetrate. The outside of the sign holder measures 30,5cm (height) by 21,5cm (width). The inside of the stainless steel frame is 27,7x19,0cm. This means that the edges of an A4 sheet are not visible; 2cm are covered by the frame all around.
The sign holder belongs on the queue-management post with cylinder (order-no. 2297) and is screwed on. The bracket is made of stainless steel with two plexiglass panes. Print out your sign on an A4 sheet and place it between the two panes. Push these into the sign holder from above. A prior lamination is not necessary because the sheet is protected from dirt and splash water by the plexiglass. However, lamination is recommended outdoors because the top of the sign holder is not closed and rainwater could penetrate. The outside of the sign holder measures 30,5cm (height) by 21,5cm (width). The inside of the stainless steel frame is 27,7x19,0cm. This means that the edges of an A4 sheet are not visible; 2cm are covered by the frame all around.
WAS
WAS Germany
Am Oheberg 1
21224 Rosengarten
Germany
office [at] wasgermany.com
There aren't any asked questions yet.
-
-
-
-
-
-
-
Café barrier (rod 140cm+ ring platters) for cloths Titanium gold
€52.79incl. VAT, equals €44.36 plus VAT*
-
Spare snap link for queue-management system - Titanium gold
€10.99incl. VAT, equals €9.24 plus VAT*
