Rio™ Commercial Bar Blender - Hamilton Beach HBB255S-CE
order no.
8945
Rio™ Commercial Bar Blender - Hamilton Beach HBB255S-CE
order no.
8945
€560.29
Prices incl. VAT plus shipping costs, free shipping (DE) from 80 €**
immediately available
delivery time:
1-5 Working days
Product properties
Motor: 1,6 peak HpVoltage: 220-240 V / 50-60 Hz
Container: 0,95l, stainless steel
Height (cm): 43,0
Depth (cm): 21,6
Width (cm): 19,0
The Rio™ Commercial Bar Blender comes from the production of Hamilton Beach and convinces especially with its reliability in terms of efficiency and performance.
The blender is equipped with the producer's own Wave~Action® System. This ensures particularly smooth, velvety results, as it continuously pushes the mass down into the blades. The blades are at least as important for achieving an ultra-smooth mixture. Therefore, this device has got a high-performance stainless steel blade. Its outer ends each bend upward at right angles to optimize the cutting radius and its angle. The sharply ground stainless steel blade is fastened to a metal drive coupling. This is designed to provide the blade with strong power, as well as high torque.
The drive clutch in turn is attached to the black base of the device. Its heart represents the motor of the blender, which convinces with a high power of 1,6 HP. The control center is also incorporated into the surface of the plastic casing. It consists of two sealed switches, that are located on the far right and left, with a legend between them. The left control is used for switching on, as it can be set to stop, on and start. The right switch can adjust the mix speed to low (1) or high (2), plus there is the pulse mode. The bottom of the mixer base is equipped with Hamilton Beach's Sure Grip™ technology, so it can assure the whole device a firm stand even when switched on.
The blender's cylindrical container is made of shiny stainless steel and features four elliptical indentations that allow the cup to be stacked and held comfortably when unscrewed from the Blender. Only the ergonomic handle is made of shatterproof black plastic, just like the base and the lid. The container holds a total of 0,95l.
Furthermore, the Rio™ Commercial Bar Blender has a black lid with a transparent panel in its middle. It extends far into the blending container and closes it with its locking edges in a triple sealed manner. The HBB255S-CE is also equipped with an 'open lid' safety sensor. If the lid is not closed, or the stainless steel vessel is not securely placed on its base, the entire device cannot be switched on and a warning symbol is activated at the control center.
The blender is equipped with the producer's own Wave~Action® System. This ensures particularly smooth, velvety results, as it continuously pushes the mass down into the blades. The blades are at least as important for achieving an ultra-smooth mixture. Therefore, this device has got a high-performance stainless steel blade. Its outer ends each bend upward at right angles to optimize the cutting radius and its angle. The sharply ground stainless steel blade is fastened to a metal drive coupling. This is designed to provide the blade with strong power, as well as high torque.
The drive clutch in turn is attached to the black base of the device. Its heart represents the motor of the blender, which convinces with a high power of 1,6 HP. The control center is also incorporated into the surface of the plastic casing. It consists of two sealed switches, that are located on the far right and left, with a legend between them. The left control is used for switching on, as it can be set to stop, on and start. The right switch can adjust the mix speed to low (1) or high (2), plus there is the pulse mode. The bottom of the mixer base is equipped with Hamilton Beach's Sure Grip™ technology, so it can assure the whole device a firm stand even when switched on.
The blender's cylindrical container is made of shiny stainless steel and features four elliptical indentations that allow the cup to be stacked and held comfortably when unscrewed from the Blender. Only the ergonomic handle is made of shatterproof black plastic, just like the base and the lid. The container holds a total of 0,95l.
Furthermore, the Rio™ Commercial Bar Blender has a black lid with a transparent panel in its middle. It extends far into the blending container and closes it with its locking edges in a triple sealed manner. The HBB255S-CE is also equipped with an 'open lid' safety sensor. If the lid is not closed, or the stainless steel vessel is not securely placed on its base, the entire device cannot be switched on and a warning symbol is activated at the control center.
Product properties
Motor: 1,6 peak HpVoltage: 220-240 V / 50-60 Hz
Container: 0,95l, stainless steel
Height (cm): 43,0
Depth (cm): 21,6
Width (cm): 19,0
The Rio™ Commercial Bar Blender comes from the production of Hamilton Beach and convinces especially with its reliability in terms of efficiency and performance.
The blender is equipped with the producer's own Wave~Action® System. This ensures particularly smooth, velvety results, as it continuously pushes the mass down into the blades. The blades are at least as important for achieving an ultra-smooth mixture. Therefore, this device has got a high-performance stainless steel blade. Its outer ends each bend upward at right angles to optimize the cutting radius and its angle. The sharply ground stainless steel blade is fastened to a metal drive coupling. This is designed to provide the blade with strong power, as well as high torque.
The drive clutch in turn is attached to the black base of the device. Its heart represents the motor of the blender, which convinces with a high power of 1,6 HP. The control center is also incorporated into the surface of the plastic casing. It consists of two sealed switches, that are located on the far right and left, with a legend between them. The left control is used for switching on, as it can be set to stop, on and start. The right switch can adjust the mix speed to low (1) or high (2), plus there is the pulse mode. The bottom of the mixer base is equipped with Hamilton Beach's Sure Grip™ technology, so it can assure the whole device a firm stand even when switched on.
The blender's cylindrical container is made of shiny stainless steel and features four elliptical indentations that allow the cup to be stacked and held comfortably when unscrewed from the Blender. Only the ergonomic handle is made of shatterproof black plastic, just like the base and the lid. The container holds a total of 0,95l.
Furthermore, the Rio™ Commercial Bar Blender has a black lid with a transparent panel in its middle. It extends far into the blending container and closes it with its locking edges in a triple sealed manner. The HBB255S-CE is also equipped with an 'open lid' safety sensor. If the lid is not closed, or the stainless steel vessel is not securely placed on its base, the entire device cannot be switched on and a warning symbol is activated at the control center.
The blender is equipped with the producer's own Wave~Action® System. This ensures particularly smooth, velvety results, as it continuously pushes the mass down into the blades. The blades are at least as important for achieving an ultra-smooth mixture. Therefore, this device has got a high-performance stainless steel blade. Its outer ends each bend upward at right angles to optimize the cutting radius and its angle. The sharply ground stainless steel blade is fastened to a metal drive coupling. This is designed to provide the blade with strong power, as well as high torque.
The drive clutch in turn is attached to the black base of the device. Its heart represents the motor of the blender, which convinces with a high power of 1,6 HP. The control center is also incorporated into the surface of the plastic casing. It consists of two sealed switches, that are located on the far right and left, with a legend between them. The left control is used for switching on, as it can be set to stop, on and start. The right switch can adjust the mix speed to low (1) or high (2), plus there is the pulse mode. The bottom of the mixer base is equipped with Hamilton Beach's Sure Grip™ technology, so it can assure the whole device a firm stand even when switched on.
The blender's cylindrical container is made of shiny stainless steel and features four elliptical indentations that allow the cup to be stacked and held comfortably when unscrewed from the Blender. Only the ergonomic handle is made of shatterproof black plastic, just like the base and the lid. The container holds a total of 0,95l.
Furthermore, the Rio™ Commercial Bar Blender has a black lid with a transparent panel in its middle. It extends far into the blending container and closes it with its locking edges in a triple sealed manner. The HBB255S-CE is also equipped with an 'open lid' safety sensor. If the lid is not closed, or the stainless steel vessel is not securely placed on its base, the entire device cannot be switched on and a warning symbol is activated at the control center.
Suggested products
Customers also bought